Villa in Paphos, Cyprus, 210 m²

building

Reinforced concrete, beams and slabs, taking into account seismic characteristics (Euro codes 2.8). Concrete category C30/37. Reinforcement of category B500S (country of origin Italy, Greece or Spain).Energy efficiency of the building in accordance with the rules of 2019 (category B+).Facade thermal insulation system StoTherm Classic, Aluminum profile systems Rabel or Muscite.

WALLS AND PARTITIONS

External walls: high-quality hollow brick with a thickness of 25 cm (Ledra 9LB25 therm series), two layers of plaster and an external thermal insulation system of the StoTherm Classic type with a 7 cm thick styrofoam insulation (Sto-EPS Board) made in Germany.

Interior walls: plasterboard system (Knauf Germany) 10 cm with 11 mm OSB panels on both sides and Rockwool inside.

FINISHING

The exterior surface will be finished in accordance with the technical characteristics of the thermal insulation system StoTherm Classic, Germany.

From the inside, all exterior (brick) walls will be finished with 3 layers of cement plaster. Internal partitions will be treated with at least two layers of putty.

The open ceilings will be covered with acrylic coating.

PAINTING

Internal wall putty and 3 layers of oil paint in bathrooms and toilets. The paint approved by the Client's designer.

All walls are white - ceilings are white or other at the customer's choice. The paint color is approved by the client's interior designer.

WALL-MOUNTED LIGHTING FITTINGS

Wall cladding in bathrooms and toilets with glazed tiles (imported from Italy) from floor to ceiling

The space between the countertops and cabinets in the kitchen will be decorated with marble.

FLOORS / TERRITORIES

Italian import Ceramic tiles or laminate flooring (color selection * available) in all rooms (inside the villa and outdoors with an area of 42 sq. m. M - courtyard). Marble for stairs.

Calacatta series from LEA Ceramica or other similar quality.

DOORS AND WINDOWS

Entrance armored door made of solid iroko wood.

All other doors and windows will be made of gray (series and color approved by the supervision of architects) aluminum, with double glazing and mesh protection. The door/window system should have a Uw≤2.9 W/m2. k. of MUSCITO. Aluminum piston for all sliding windows/doors.

Italian designer interior doors with high-quality door fittings imported from Italy, GB DORICO models or similar quality.

wardrobe

Italian designer cabinets imported from Italy, SANTA LUCIA ACRYLIC models.

kitchen

Italian design kitchen with Corian work surfaces and a Corian type sink or marble surface with a stainless steel sink (FRANKE).

sewage system

Connection to the main sewer system.

SANITARY AND TECHNICAL EQUIPMENT

White Italian bathroom fittings, W.C. Duravit-Architect model, Duravit washbasins-Architect model, Duravit bidet, Duravit bathtub-Cube model or Duravit shower-Texas model and Hans Grohe accessories.

All faucets are German - Hans Grohe - Talise model.

DRAINAGE SYSTEM

Double-tube heat exchangers of the "pipe in a pipe" type according to GOST. Two taps in the garden. Automatic irrigation system for watering the garden.

ELECTRICAL EQUIPMENT OF THE BUILDING

Installation of the internal wiring system in accordance with the requirements of the Department of Energy Supply. provisions for telephone, T.V, T.V antenna socket and cable TV, alarm system.

provisions for air conditioning in every room. 3 double sockets in each room. Waterproof double outlet on the terrace outside the kitchen.

Everything is according to the construction plans.

lighting

All lighting devices inside/outside will be installed using LED technology. Supplier of PGS Lighting, all fittings from Spain, Italy, Germany.

HOT WATER SUPPLY SYSTEM

Solar and electric heater with two solar panels with a capacity of 1200 liters and a hot water cylinder with a volume of 220 liters. Water pressure boosting system (type Grundfos MQ 3-45).

BALCONIES

10cm styrofoam insulation board (type Sto-EPS Board Top32 CE) will be used for thermal insulation of the roof and balconies above the interior of the building. A 10cm C25 concrete screed (including Y6/20 steel mesh) will be made on top of the insulation, a one-component fiber-reinforced cement mortar for elastic waterproofing and protection of Sikalastic-1K concrete will be used to seal and increase the water resistance of the roof and balconies. Laying of tiles on balconies will be carried out on cement mortar. A high-molecular cement water-repellent filler (approved by the Client's engineer) will be used for cementing ceramic tiles. Glass protective railings will be installed on balconies. The type of glass attachment will be at the choice of the architect.

FRONT FACADE

The materials used on the facade (wood, stone and/or concrete/hpl metal/glass) will be selected according to the architect's design and material must be approved by the project engineer architect.

swimming pool

The size of the pool is 21m2 by Saratoga Pools. Reinforced concrete monolithic walls. Pentair-America water pump, engine and filtration system. The pool will be finished with a 3D effect of a PVC liner from Rinolit 3000 Touch of German production.

DETAILED DESCRIPTION

Kitchen

Italian tile (color selection is possible*)

Italian fittings with a facade without handles (color selection is possible*)

Individually designed layouts

Corian countertops(color selection is possible*)

Corian underwater sink with Italian chrome mixer

MK sockets on the kitchen apron

provisions for washing machine, washbasin, refrigerator with freezer, dishwasher

Mixer with "clean water" system (Osmosis)

* Depending on the construction stage

Bathroom

Floor tiles(color selection is possible*)

The walls are tiled to the ceiling (color selection is possible*)

Italyansk plumbing equipment

Built-in toilet with flush-mounted tank, padded seat and lid

The Italian shower set consists of a shower head, a hose and a retainer with flush-mounted communications.

Individually designed washbasin with mirror cabinet with backlight, with built-in connector for electric shaver

Italian chrome fittings

Modern glass shower cabin

Electric towel rails and towel racks

Access to sanitary fittings for each bathroom / toilet

Living room and other rooms

Calacatta series from LEA Ceramica in the lobby and living areas (color selection is possible*)

Lacquered doors

Individually designed built-in cabinets (color selection is possible*)

* Depending on the construction stage

Climate control

heating: Underfloor heating in all rooms and corridors with a heat pump system - LG or MITSUBISHI ELECTRIC

AIR CONDITIONING: Built–in air conditioning system in all rooms - LG or MITSUBISHI ELECTRIC

Electrical devices

Built-in LED lights in all rooms

Decorative brightness-controlled LED lighting in the main rooms

LED lighting on all balconies

Automation for lighting in all bathrooms and toilets

External power connector on all terraces

Thin white rosettes

Telephone and data points in the main premises

Additional details

Solar system for water heating (hot water cylinder with a volume of 220 liters, cold water tank with a capacity of 1200 liters)

Water pressure boosting system (type Grundfos MQ 3-45)

Aluminum profiles with double glazing Uw≤2.9W/m2K (microwatt ≤ 2.9 watts per square meter-kelvin)

Energy efficiency of the building in accordance with the rules of 2019 (category B+).

provisions for the alarm system;

provisions for the video surveillance system;

The gates at the entrance to the parking spaces will be cast iron;

Automatic watering system in the garden.